| 项目 Project | KHC-1 | KHC-1B | KHC-1D |
车 体 部 分 | 外形尺寸Size | 275(L)×275(W)×260(H) |
重量Weight | 11.5Kg |
使用电源Input Voltage | AC100V | AC24V | AC100V或AC24V |
功率Power | ＜80W | ＜30W | ＜80W或＜30W |
驱动电机Drive motor | DC70V20W 14RPM | DC24V20W 14RPM | DC24V 20W 14RPM |
减速器Gear Reduction | 200:1 |
行走速度Travel speed | 10-120cm/min无级调速 Stepless speed regulation |
磁力方式 Magnet | 电磁Electromagnetic type | 永磁Permanent magnet | 永磁Permanent magnet |
驱动方式Drive Mode | 四轮齿轮传动4 wheel-gear-driver motor | 四轮链轮驱动4 wheel-chain-driver motor | 四轮链轮驱动4 wheel-chain-driver motor |
仿行形式Imitation in the form of line | 仿行轮沿立板移动 Imitate the conduct wheel to move along setting up the board |
行走方向Direction | 左方向或右方向Left /Right |
焊接盲区Blind spot welding | 275mm(始端Start+末端End) |
焊接方式Welding methods | 单面角焊 Single-sided angle welding | 双面角焊 Double-sided angle welding |
焊枪数量The number of torch | 1 | 2 |
|
调 节 部 分 | 上/下Up / down | 30mm |
前/后Forward / back | 40mm |
焊接角度Welding angle | 45°± 30° |
焊枪夹具 Torch clamp | 手柄拧紧式 Hinge handle clamping type |
|
控 制 部 分 | 主要功能Main function | 电源开关 Power switch |
焊接开始/停止按钮 Welding start / stop button |
方向开关 Direction switch |
速度调节 Travel speed |
点动开关 Inching option |
|
标准配置Standard configuration | 电源电缆Power cable | 10m(配专用电源适配器With special adapter) |
选用配置Optional configuration | 焊枪 Welding torch | 500A空冷直管焊枪 Air-cooled auto welding torch，长度 Length:4-8m |