模關係Clamping relationship | 項目ITEM | 單位UNIT | JY-DC250T |
開閉力Locking force | ton | 250 |
模面尺寸（長*寬）Size of plate ( L*W ) | mm | 850*850 |
柱內間隔（長*寬）Space of tiebars ( L*W ) | mm | 540*540 |
中板行程Die Stroke | mm | 380 |
模型最大厚度Thickness of die ( MAX ) | mm | 600 |
模型最小厚度Thickness of die ( MIN ) | mm | 250 |
柱桿直徑Tie bar diameter | mm | Φ100 |
模開時間可調Die open time ( adjustable ) | sec | 高1.02 ( high ) |
低3.14 ( low ) |
模閉時間可調Die lock time ( adjustable ) | sec | 高2.09 ( high ) |
低6.43 ( low ) |
調模速度Die adjustment speed | mm/min | 200 |
射出關係Injecting relationship | 射出力Injecting force | ton | 12.9-25.7 |
增壓比（壓力設定可變） | ......... | 01:02.0 |
Boosted pressure ratio ( Pressure setting : Variable ) |
射出行程Injecting stroke | mm | 385 |
突出量（固定面至推頭）Plunger tip penetration | mm | 175 |
射出位置Injecting position | mm | -125 |
空打低速Dry injecting ( low speed ) | mm/sec | 0.1-1.53 |
空打高速Dry injecting ( high speed ) | mm/sec | 0.1-6.5 |
標準料管直徑Standard tip dia | mm | Φ60 |
射出壓力（料管之場合）Injecting pressure ( chip dia cases ) | kg/cm2 | 456 |
押出關係Ejecting relationship | 押出力Ejecting force | ton | 12.9 |
押出行程Ejecting stroke | mm | 120 |
押出時間（出）Ejecting time ( adjustable ) | sec | 0.46 |
押出時間（退）Ejecting rewary time ( adjustable ) | sec | 0.25 |
中子關係Core relationship | 中子電磁弁Core-solenoidvalve | PT | 1/2" 2PCS |
油壓中子取出口Oil hydraulic core outlct | PT | 組 |
1/2"*3 ( sets ) |
速度調整Velocit regulation ( abjustable ) | mm/sec | 0-200 |
中子限動插座孔Plug socket | PCS | Core 3 Set |
油壓關係Oilhydrauic relationship | 定格壓力Constant pressure | kg/cm2 | 105 |
泵浦壓力Pump pressure | kg/cm2 | 210 |
泵浦容量Pump volume | 1/min | 183 |
泵浦型式（油研）Pump type ( YUKEN ) | PV2R | 33-76-76 |
作動油量Volume oil tank | 1 | 700 |
冷卻水量Cooling water | 1/min | 水溫25°C |
20 ( water temp ) |
冷卻關係Cooling water relationship | 模具冷卻水口管徑Dit cooling water inlet pipe dia | PT | 1 1/4" |
模具冷卻水出口管徑Dit cooling water output pipe dia | PT | 1 1/4" |
模具冷卻水閥門數 | PCS | 入( in) 6 |
Number of die cooling water adjusting valve cooling water | 出( out )8 |
冷卻水量cooling water | 1/min | 模具用 |
25-50 ( pattern ) |
電器關係Electric relationship | 電動機容量（泵浦用）Electro motor capacity ( for pump ) | ......... | 25 HP*6P |
機台總電源Total power supply | | AC 200/220 |
( 50/60 HZ ) |
電源容量power supply capacity | KVA | 43 |
機械關係Machine relationship | 機台尺寸Size of machine ( Apporx. L*W*H ) | mm | 5640*1750*2200 |
淨重（約）Net Weight ( approximate ) | kgs | 9800 |
鑄造能力 Casting capacities | 射料推頭直徑Chip | kgs | 50 | 60 | 70 |
射出壓力Injecting pressure | kgs/cm2 | 656 | 456 | 335 |
鑄造面積Cast area | cm2 | 381 | 548 | 746 |
射出容量Injecting volume | cm3 | 567 | 816 | 1111 |
射出重量Injecting Weight | kgs | 1.53 | 2.2 | 3 |